Thanks to the boys of
TOKYO TRASH BABY
I recieved some great info/ tips from the boys of TTB. Such as the angle the chainplates are meant to be at and where they will end up (22.5 from mast base).
As you can see I got the chainplates in.
The keel case is: Bottom 24mm/ Top 18mm/ Front 18mm and Rear 12mm
Cockpit is all in place. Getting a nice curve was an interesting experience, but I think well worth the effort.
Just need to fillet and glass now.
Foredeck is down, just need to fillet and tape inside and out
(used heaps of weights, straps, and clamps to hold it in place while the initital epoxy went off)
