OK this is getting interesting

Ok the frames are all filleted and glassed in. A couple of issues have come up. The front three frames are all 5-10mm too tall and frame 89 is too wide. I don't know whether the frames where cut wrong or the plan set we cut from was wrong.

Bottom line is that it's not too much of a drama and we'll work around the problem--minor aas it is. The big thing is the hull is still square and strong.

The ouside of the hull will need some fairing to fill in a relatively small hollow caused by pulling in the side with the zip ties.

Next step will take some time; putting in the supports for the cabin sole & putting in the cabin sole inself, putting in the supports for the cockpit floor and strengthening the top of frame 89 for cabin roof/ mast support.